What not to do when using a Reflect Sight: Certain tips and tricks to ensure proper safety and security during all situations

The reflect sight is basically a red dot sight that helps shooters and other hunters to aim at a proper distance. Basically, the aiming happens in such a situation where the red dot just gets partially projected to the forefront and behind the actual lens. In such a position, the light is able to reflect back and catch the lens and therefore, fall in to the eyes of the shooter. It can also be said that the partial lens attached is a sort of second mirror that only reflects the red dot. Normally the lens is like all other lenses, where normal light is allowed to pass and create a sort of an illumination inside. Such a position might also be found when one tries to view an object from a telescope.

reflect sight

Advantages and disadvantages of reflect sight:

There is a coating that is attached to most lenses that help in reflecting back the amount of light that has entered. A better quality sight does not carry much of this reflection within. For illumination to take place in a more positive manner, one might use a particular wavelength to scatter the light and then narrow the entire setup. However, most reflect sights use of some sort artificial light that has been collected from an FOS or the fibre optical system. it is due to greater wavelengths provided by such system that the light is able to concentrate on the particular area for a longer period of time. However, even after so much information, one often tends to forget the disadvantages with reflect sights. When using a reflect sight, one should surely wear glasses for the protection of the eye. The sight is quite active to radiation and high illumination and therefore, not having any specs on is generally considered to be an ill-informed task. Secondly, the wavelength of the light must be kept visible up to a distance so that it is easy for shooters and other individuals to stay focused. Getting the wavelength too long might disturb the focus and lead to accidents and other dangers.

Keeping safety at one’s own hands:

One should really be careful when using a reflect sight because of the disadvantages it showers on the people. Although the light does not contain any form of laser or other such technology installed, one must have proper recognition of the fact that the lens must be able to reflect the light on the eye, so that the focused point is not shifted at any point of time. Moreover, the configurations of  reflect sights must be kept right and must be lowered at times when required. However, it should touch the bottom line of the lens so as to prevent the light from hitting on the opposite direction. Taking a great leap towards the light must be surely be safe enough and thus, reflect sights must be used with care.

What Is Greenhouse Effect

Green house effect is known to be a natural process that is responsible for warming up the surface of the earth. It is a natural process that was discovered in 1827 by Joseph Foruieer.

The green house effect is known to keep the temperature of the earth high; which is higher than it would really be if directly heated by the sun; this is because when the light from the sun reaches the earth’s surface some of the light is absorbed and radiated back as heat to the space. The green houses gases are responsible for absorbing and radiating back the heat to space.

The green houses gases

The green houses gases that play an integral role absorbing and in the sending back of heat from earth are:

  • Water vapour- This is the most abundant green house gas that increases with the warming up of the earth’s atmosphere.
  • Carbon dioxide- This is like an important but a very minor part of the atmosphere.
  • Methane- This is a hydrocarbon gas that is produced by the natural sources and as well as from the human activities; it is quite an active green house gas but it also the one which is the less abundant.
  • Nitrous oxide- This is known to be a powerful green house gas which is produced by nitric acid production, biomass burning, organic fertilizers and fossil fuel combustion.
  • Chlorofluorocarbons- These are synthetic compounds that are used in a number of applications


The energy that is absorbed by the green houses gases is responsible for heating up the surface of the earth, without green house effect the earth’s temperature would be less making the surface cold and survival of the people difficult. Increase in the green houses gases leads to the heating of the surface of the earth which can further create a hole in the ozone layer.

Causes for the green house effect

  • Fossil fuel burning- The fossil fuels like coal, natural gas and oil are used in our lives on a daily basis for the production of electricity and transportation. The burning of these fossil fuels lead to the emission of carbon dioxide which is the main gas among all the other green houses gases that is responsible for the green house effect.
  • Deforestation- Cutting down of tress and burning of wood due to the growing urban culture and development is responsible for the release of carbon dioxide.
  • Farming- Nitrous oxide is an important green house gas that is used for fertilizers, which in return leads to the green house effect and further turns into global warming.
  • Population- With the ever increasing population there has been an increase in the basic necessities of life. Moreover a lot of cities have become industrial hubs leading to the release of gases which has further led to the green house effect.


If there would be no green house effect then there would be no life on earth, so it is needed for the basic survival of the human beings. The green house effect is also responsible for maintaining an ecological balance.



How to Get Electricity from Coal and Wind

Electricity is vital in our daily lives as to a large extent most of us are dependent on electricity for a quite a number of daily jobs. It is the source that lights up the appliances, the air conditioners, the fan and it is also very important for a lot of industrial processes. Electricity is generated through a number of sources; some are renewable sources while some are non renewable ones. Solar energy is on a rise these days mainly because of the fall in the solar power prices, increasing demand for renewable energy and also because of the need to save the environment.

Wind energy

India is undoubtedly a nation where there is maximum production of power from the renewable sources of energy. Just like solar energy, wind is also a source of renewable energy and India is considered to be the fourth largest wind energy producer in the world. Wind energy is growing at a fast speed in the world mainly because of all the various benefits that it offers. The wind energy is converted by the wind turbines, which are of two types the horizontal and the vertical axis wind turbines. In order to create electricity from wind, the shaft of the wind turbine has to be connected with a generator. This is the basic requirement for creating wind energy.

Advantages of wind energy

  • It is cost effective and land based, which makes it the lowest priced source of energy.
  • Wind energy helps in creating jobs for the unemployed, as the installation, maintenance and manufacturing of wind energy requires a lot of work force.
  • It is a clean fuel, which means it doesn’t pollute the environment and it has an abundant supply which is inexhaustible.


Except for these renewable sources of energy, there is one such non-renewable source of energy also that is used for energy supply and that is coal which is quite popular and widely used by the people of India.

Non renewable resource (coal)

Indians are not only dependent on solar and wind energy but also on the coal for producing energy, coal is the centre of all the resources and without it the future of our country would be in Dark. The reason for this is that it is affordable power as we as it is found in abundant in our country. In order to get electricity from coal there is a long process that needs to be followed:


  • Coal is milled into powder form as it can be burnt quickly.
  • Then the powdered form is blow into a chamber of the boiler where the coal is burnt at a high temperature.
  • After this the hot gas and energy produced by it, is converted into steam.
  • Then the converted steam is pushed through the turbine shaft which at the end produces electrify.

So whether one uses renewable or non renewable, the main motive should be to produce electricity as there are still a lot of houses and villages where there is still no electricity.